Revell F-84F Review

Usually I build models of aircraft I’ve seen or know something about. This one is different. I bought this kit purely as practice. In prep for building a P-51 Mustang, I got this kit as a test platform for a new metallic paint. I learned a lot through this build process, and I’m glad I did this project. When I was at the hobby store, I saw this kit sitting on a discount shelf, half off its suggested price of $40. What I didn’t know was just how old this kit was.

Originally released in 1984, the tooling has not changed since. It’s received several new decals over the years, but no change to the model itself. Because of that, it has raised panel lines. This is actually the first kit I’ve built with raised panel lines. Since it was intended as practice, I didn’t take the time to sand and scribe new lines. I went ahead with the kit knowing that my options for weathering would be limited. Despite its age, this is likely one of the most detailed kits I’ve worked on. The landing gear has exceptional detail with hydraulic lines and intricate gear doors. The landing gear bays are also fully plumbed and detailed, and the ejection seat comes complete with seatbelts and wiring. For such an old kit, I was incredibly impressed with the detail.

The kit has options for an open or closed canopy. Whenever possible, I always leave it open to show off the details. I used this as an opportunity to take my time and give the cockpit the attention it deserved. Everything was hand painted using Vallejo acrylics. I weathered with silver dry brushing and accented shadows with black wash. The kit includes 4 decals for the instrument panel. They went on easily and reacted well to Micro Sol. I’m very pleased with the results and feel like this is my best cockpit to date.

Assembly of the kit was pretty straightforward and uneventful. Everything fit together well with only minor filler needed in a few places. I primed the kit with Mr. Surfacer 1000 and then painted with AK Xtreme Metal aluminum. It covered really well and looks amazing. It’s much less forgiving than Vallejo’s Metal Color, but I feel the end result is better.

At this point the airplane looked a little boring, all silver with no markings. This is where the kit started to go down hill a little. First of all, I hate decals. It’s always something that I’ve never been great at, although my skills have improved over the past few kits. I've gotten to the point that I can handle small to medium decals no problem. What I’m not good at is large decals that wrap over curved surfaces or parts of the wing. The Thunderbirds decals look very pretty, but getting them to match the quality of the box art was no walk in the park.

One of the first decals I applied was the rudder/vertical stabilizer. What I didn’t realize is that it should have been applied before I even installed the horizontal stabilizer. There is a small cutout in the decals for the piece to pass through. Since I was in no position to take the model apart, I ended up cutting the decal down the middle and sandwiching it around the elevator. It worked fine, but there is a little gap that I couldn’t quite get right.

The wings weren’t all that bad, although I should have worked on alignment a little more. If you look closely there is a little piece of silver that is showing where the decals on either side of the wing don’t match up. The worst part of all of this was the decals that go on the nose. Surfaces curve in multiple directions and it was incredibly hard to get it to lay flat without wrinkles. When I got it smooth in one place, it made another place wrinkle. I eventually settled on an in-between and would let decal softener deal with the rest. After multiple coats of softener and rubbing with a cotton swab, I was able to get it to mostly look right, although there are still some wrinkles that I was not able to get out. The raised panel lines also made it more difficult to get a good result. At times it was hard to tell if there was a wrinkle or a panel line. Adding softener to get the decal to sit better almost made it look worse in some ways since the panel line protruded even more through the graphic.

Overall this is a decent kit for the price. I find that 1/48 scale is the sweet spot for jet fighters. This kit features lots of detail for its age, but the combination for raised panel lines and decals for the Thunderbirds version make it a difficult build. If you want a great end result, I’d recommend this to only experienced modelers with skills for decals. Otherwise, it’s not that hard of a kit to build and paint. Even easier if you find a version with different decals.

F-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale modelF-84F Thunderstreak  scale model

More reviews