Minicraft Beechcraft Bonanza V35 Review
General aviation kits are hard to come by, especially ones that are for civil/personal use. Minicraft is one of the few brands out there that makes planes that I flew during training. Their collection includes the Cessna 150, 172, Piper Cherokee, and a few different Bonanzas. In my view, the V-tail Bonanza is one of the most dangerous general aviation aircraft. I have known far too many people that got themselves killed in a V35. Whether it's due to the overly powerful engine, lack of skill combined with a low price, aerodynamic differences from the V-tail, or all of these factors, this is a plane I would never own or fly. With that being said, I thought it would be fun to make this aircraft painted in its classic beige paint scheme. I also came up with a fun idea for my first diorama: a ramp scene where it’s being worked on, going through its annual inspection and being propped on jacks.
Build started with the interior. In traditional Minicraft fashion, the interior is pretty blank with not a lot of detail. No decals were provided for the dash, but some silver dry brushing and 5-minute epoxy on the gauges made them pop. Most of this won’t be visible when it's all closed up, so I’m not too disappointed in the lack of detail.
The rest of the build went pretty smooth. Everything lined up well and had no fit issues. I painted the airplane with a 1/1 mix of sand beige and white. I masked the tail and wings and painted it RAL3000. This is more of an orange-red, which gives it a slightly faded look. The engine was painted chrome and weathered with a brown wash. To top it off, I added some blue spark plug wiring and orange ducting for the cabin heater.
The model has an impressive amount of surface detail, panel lines, and rivets. Most of it is washed out with the beige, so I used the same brown wash from the engine to line all of the panels. This gave it a great dirty look. It’s not too stark, but it does make all of the details pop. This color also complemented the red really well.
If you’re going to close the engine cowl, there is almost no need to install the engine since it won’t be visible. Use that space to install nose weights, because it’s a tail sitter! Minicraft gives you no room to install weights, and I’ve had this same issue with their Cessna 172. Luckily I was planning on putting it on jacks and showing off the engine, so it wasn’t an issue for me.
After a gloss coat, I used only a single decal: the N number. Other than that, there were no stencils included and the rest of the decals had to do with the paint scheme markings. Now it was time for the diorama! I started by cutting a piece of foam. I applied AK Interactive Terrains Asphalt for the ground. Since this is more of a vignette than a diorama, I used AK Interactive Terrains Light Earth for the edges of the foam. Once dry, I masked and airbrushed ground markings in Tamiya yellow. Finally, to show some wear I used sandpaper to scuff the ground and add some discoloration.
Jacks were scratch built from styrene rod and strips. I based them off photos of real jacks, and hand painted them with yellow and red to pop. This was a pretty simple diorama scene that was aided with AK’s really cool Terrains lineup. It was nice how simple the kit was. It gave me extra time to detail the engine with wiring and focus more on the ramp scene. This was a very fun project, and I look forward to building more dioramas in the future.







More reviews
- Academy T-34B Mentor Review
- Airfix Boeing Chinook HC.1 Review
- Eduard L-39 Albatros Review
- Italeri V-22 Osprey Review
- Tamiya A-1H Skyraider Review
- Minicraft Cessna Citation I Review
- Revell Porsche 911 Carrera Review
- Revell F-15E Strike Eagle Review
- Building an Abandoned Ghostbusters ECTO-1
- Anigrand C-17 Globemaster III Review