Academy T-34B Mentor Review

To date, the T-34 Mentor is one of few aircraft I’ve modeled that I have no experience flying or witnessing in person. It’s quite possible I’ve come across one of these at a museum, but it’s not a subject that I wanted to model. It just happened to be one that spoke to me at the hobby shop. I noticed that bright, international orange and the low price. I couldn’t pass up the opportunity to get the model, so I quickly added it to the top of my upcoming projects.

This kit first started out under the Minicraft name. Because of that, we got basic detail and parts that are not as well molded as they possibly could be. Still, reasonable detail was achieved. In fact, the backs of the seats are the thinnest pieces I’ve ever come across. Regardless of the fact that this is a Minicraft kit, Academy has gone ahead and added a few touches. First, they updated the decals with some new schemes. Also exciting is the addition of window masks. These are usually an aftermarket purchase, but Academy includes them right in the box.

Build started with the interior. It’s fairly simple but closed off enough that you’re not going to see a lot of it. Decals are included for the instrument panels and side walls. Seat cushions are molded separately, which makes it easier to paint and install later. Seatbelts are also molded into the cushions and detail well with a fine brush. Fit of the cockpit was good and everything came together into one complete unit that could be slotted in between the two fuselage halves. I had some difficulty getting the two halves of the fuselage to fit together. There wasn’t a lot of room for weights in the nose, plus a rather large gap in the front made the assembly somewhat complex. Another weak point of the fit was the nose and spinner. The instructions guide you to building it with a spinning propeller. However, later on I found that the rod for the propeller was too short and the prop didn’t go deep enough to slot on.

There was also some interesting engineering on the wing spars. They’re using actual spars, which is cool in theory, but you’re essentially building a four sided box that must be perfectly square and line up exactly with the landing gear bays in the wings. It worked out well, but lots of test fitting was required. Once the wing and tail was installed, it was time for painting. I started by painting the entire airplane white, and masking and painting the orange. Instead of using the black decals for walkways and the anti glare strip on the nose, I spent the time masking and painting those by hand. I’m very pleased with the results and feel like the extra time spent was worth it.

The landing gear was installed without any issue, but the doors needed slight modification in order to be displayed open. The canopy can only be displayed closed, with no hardware included to prop it open. Decals went down easily without any issue. A coat of clear gloss first made it so that there was no silvering. The decals also responded very well to setting solutions. Finally, the airplane was lightly weathered with a gray wash.

Despite a few fit issues and questionable engineering, I really liked this kit. It was a fun, quick build of an interesting subject and a cool paint job. Detail is decent and you get quite a lot for the price. I definitely recommend this kit as long as you have patience to work with the fit issues.

Beechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale modelBeechcraft T-34B Mentor scale model

More reviews