Revell Stearman Review
I first got interested in the Stearman during a camping trip. The city I was staying in had a tiny airport where a pilot was offering rides in his Stearman. He would take you on a tour of the coastline at about 1000 feet. I didn’t go for a ride, but I did watch takeoff and landing as well as the loud, slow plane as it moved along the beach. It was a fun experience to see such an old plane restored and flying today. I wasn’t planning on modeling this plane until I spotted a giant box sitting on the bottom shelf of the hobby store. I’m a fan of big models, and at 1/32 scale I was excited with all of the details I could add to it.
This particular kit has gone through revisions over the years, unfortunately removing parts and making changes that resulted in less detail. As evident with the second propeller included in the box, it used to offer a wood propeller option. Most of the omitted pieces were related to the engine, which were hidden away behind the firewall and out of view. I’m not too disappointed in this, as this model had outstanding detail. The cockpit was fairly detailed, although less so compared to previous tooling revisions, and the outside has plenty of rivet details and fabric spar humps.
I started building the interior. I didn’t agree with everything the instructions dictated in regards to color choices. I made a few of my own decisions on shades, but for the most part kept it pretty straightforward. My inspiration behind this was a restored Stearman that was overall in good shape but still dirty for slightly worn from regular use. I hand painted the wood grain on the floor but added a few drops of oil stain under the rudder pedals. The interior framing was painted interior green with some silver weathering from a colored pencil. The kit included decals for the seatbelts. They looked cheap and way too big for the scale. I decided to try something I’ve never done before and built my own shoulder harness. I took strips of masking tape, painted them yellow, and added a buckle from bent wire. It’s not the most accurate or detailed, but I was very happy with the result.
Assembling the plane was very easy. Every piece fit together perfectly with no gaps. I didn’t need any filler on this project and was able to get straight to painting. The Stearman had two shades of blue throughout its lifetime. In early versions, the color was a lighter shade of blue. Later in the years they were painted a darker shade, while the yellow remained consistent. I was inspired by the box art and chose the lighter shade. Wanting to stick with Model Air paint, I settled on Light Sea Blue. I thought it would be way too light, but it ended up looking perfect. The yellow was a little harder to find in the correct shade, so I went for what the instructions called for and picked up Revell’s yellow silk aqua color. I thinned it with aqua mix in order to spray. I had lots of issues getting this paint to spray properly. I was constantly drying in the airbrush or in the air before it made it to the model. It took a lot of trial and error in order to get the right consistency, but in the end it was complete and I was very pleased with the shade of yellow.
The radial engine was very detailed and had lots of parts. All of the exhaust and valves were modeled and painted separately. The pieces were sandwiched together with amazing alignment to build a very detailed engine. Since the wooden propeller decal was no longer included, I went with a chrome propeller and yellow tips. Decals helped finish everything off. They went down perfectly and responded well to setting solution after a few applications. The model was weathered with some washes inside, silver dry brushing on the engine, and artists pastels around leak and soot areas. This was my first time weathering with pastels and I think it turned out amazing. It looks very realistic. It’s a subtle effect but add a ton of realism without really noticing it too much.
Now comes the hard part: rigging. This is my first biplane, and I’ve heard how this is always the hardest part. While it was frustrating at the beginning, I quickly got the hang of it. To make my job easier, I used EZ Line Fine. This is a stretchy fabric line that is much more forgiving and easier to work with than wire or stretched sprue. I used a pin vise to drill out the holes before painting, which helped me to find where the string was supposed to go. A medium viscosity super glue worked well when used with a fine tip applicator. I first filled the hole with glue, used tweezers to insert the string, and dropped some accelerator on top. I repeated this process over and over and over until it was finally done. While the string may not look the most realistic, it’s better than nothing and was fairly easy to work with.
Overall I’m really pleased with the new tooling on Revell’s Stearman. It has lots of detail and opportunities for weathering and further enhancement. Instructions were very good and the parts fit together perfectly. Little was needed in terms of cleaning flash or attachment points. In fact, the attachment points were usually in hidden places that get covered by something else. While rigging is always difficult, the build itself was not. There was enough pieces for a detailed model, but not so much that it was tedious. I really like this kit and highly recommend it. Finally a model in my collection that isn’t gray or silver!









More reviews
- Academy T-34B Mentor Review
- Airfix Boeing Chinook HC.1 Review
- Eduard L-39 Albatros Review
- Italeri V-22 Osprey Review
- Tamiya A-1H Skyraider Review
- Minicraft Cessna Citation I Review
- Revell Porsche 911 Carrera Review
- Minicraft Beechcraft Bonanza V35 Review
- Revell F-15E Strike Eagle Review
- Building an Abandoned Ghostbusters ECTO-1