Revell Ford Tri-Motor Review
I first learned about the Ford Tri-Motor at the Smithsonian Air and Space museum. It was an odd looking plane. I had never seen or even knew that there was a triple motor airplane in existence. As I was shopping around online, I came across this model. It was relatively cheap and looked simple enough, so I picked it up and was able to finish this kit in about 5 days.
I knew this wasn’t going to be a high quality kit with lots of details. But I was surprised just how bad it was. There was flash on nearly every part. Ejector pin marks were present everywhere and interfered with the fit. Everything had to be trimmed, cleaned, and sanded. The tail wheel assembly was a solid piece of plastic. I used a razor saw to trim that out and make empty space where it should be.
During this process, I noticed a copyright date printed on the inside of the fuselage. 1956! No wonder the quality and fit was poor. A quick look at scalemates shows that this model has gone through numerous iterations and changes throughout the years. And they seemingly just kept adding. Despite the instructions having no mention of any of this, the sprue contained skis, dogs, a sled, and figures. That was a nice surprise, so half way into my planning I made the decision to use skis rather than tires, even if it wasn’t accurate with the decals provided.
There weren’t a lot of pieces to this puzzle. Details were basic with no interior, just a single piece engine, and basic landing gear. Fit of the body was poor, but with lots of sanding and filler I was able to get it to a point that was acceptable. However, it was difficult to fill and sand certain areas due to the ribbed aluminum skin. The other parts, including engine and propellers, fit pretty well and had no issues.
Instructions only call for 4 colors. This made painting pretty quick. With most of the airplane assembled, I sprayed the body with Vallejo Metal Color aluminum. Engines were painted flat black with a silver dry brush on top. I went with a wooden look to the skis, again with a lighter color dry brushed on top to accent the grain.
For decals, we have 3 different airlines to choose from. They applied well, came off the paper easily, were thick, and easy to work with. Setting solution worked, although a few applications were needed to get it to settle into the panel lines. The model was lightly weathered with brown model wash. I applied it to the exhaust areas, streaking it back over the wing and decals as well.
Overall this is a very simple and easy kit. Despite the fit and quality issues, a little cleanup went a long way. The box claims this is a level 4 kit. In the previous years, it was considered a level 2. I agree with the previous rating. I would say this is a level 2 difficulty. It didn’t have a lot of parts, only had 4 colors that needed to be painted, and decals were simple.






More reviews
- Academy T-34B Mentor Review
- Airfix Boeing Chinook HC.1 Review
- Eduard L-39 Albatros Review
- Italeri V-22 Osprey Review
- Tamiya A-1H Skyraider Review
- Minicraft Cessna Citation I Review
- Revell Porsche 911 Carrera Review
- Minicraft Beechcraft Bonanza V35 Review
- Revell F-15E Strike Eagle Review
- Building an Abandoned Ghostbusters ECTO-1